The 32x32 Modular Matrix for HDMI w/ HDCP provides IR control. Controlling IR through
the matrix can be accomplished using an IR extender (Gefen part no. EXT-RMT-EXTIRN)
or an automation control device. Refer to the user documentation that came with your
automation system for details.
Controlling the Display from the Source Location
1. Connect the 3.5mm mini-mono end of the IR cable from the
IR IN
port on the matrix to the
automation system.
2. Connect an IR emitter (Gefen part no. EXT-IREMIT) from the
IR Out
jack on the Receiver
unit to IR sensor on the display.
page | 37
Operating the 32x32 Modular Matrix for HDMI w/ HDCP
Using Bidirectional IR
HDMI cable
HDMI cable
Receiver unit
Matrix
CAT-5
To source
IR emitter
from Automation
System
IR signals
