Getting Started
page | 3
Panel Layout
Back Panel
ID
Name
Description
1
USB
Used for updating the firmware. See the
Firmware Update Procedure
for more
information.
2
Genlock
Connect a BNC cable between this
connector and a clock or other reference.
3
Coax Audio Out
Connect a digital audio cable from this
S/PDIF connector to an external amplifier.
4
DVI In
Connect a DVI -D cable from this connector
to the DVI source.
5
HDMI In
Connect an HDMI cable from this connector
to the HDMI source.
6
3GSDI (Out A / Out B)
Connect the scaler to the 3GSDI
destination using BNC-type cables.
7
RS-232
Connect an RS-232 cable from this port
to an RS-232 control device. This port
provides remote control of the product from
a remote location.
8
Power switch
Push this switch to the “-” position to
power-on the unit. Push this switch to
the “o” position to power-off the unit.
9
Fuse drawer
Contains the fuse for the internal power
supply. See
Fuse Replacement
for details
on replacing the fuse.
10
IEC receptacle
Connect the included AC power cord
from this power receptacle to an available
electrical outlet.
1
3
5
7
8
10
2
4
6
9
