page | 34
RS-232 Commands
Advanced Operation
#extract
The
#extract
command zooms-in on specified are of the input video signal. The default
value for
param1
is 100. The default value for
param2
and
param3
is 50.
Syntax
:
#bright param1 param2
Parameters
:
param1
Extract size
[1 ... 100]
param2
Horizontal position
[1 ... 100]
param3
Vertical position
[1 ... 100]
#filmmode
The
#filmmode
command, when enabled, produces a progressive output signal from an
interlaced input signal. This feature automatically detects repeated field sequences present
in interlaced signals, such as 50 Hz or 60 Hz field sequences (no repeated fields), 60 Hz
3:2 pull-down, including broken or edited sequence detection, 60 Hz 2:2: pull-down, 50 Hz
2:2 pull-down, static frames, and multi-directional and inter-field motion.
Syntax
:
#filmmode param1
Parameters
:
param1
Value
[0
...
1]
Value
Description
0
Disable film mode
1
Enable film mode
