page | 53
5. Remove the fuse from the C-cradle on the fuse door.
6. Replace the fuse. Only use a 5mm x 20mm 250V / 2A fuse.
7. Gently replace the fuse drawer until it locks into place. Do not force the fuse drawer
into place. If the fuse drawer does not lock into place, the fuse may not be centered
in the C-cradle. In this case, rotate the scaler on its side and reinstall the fuse drawer.
This will allow the fuse to stay centered as the fuse drawer is installed.
Appendix
Fuse Replacement
ATTENTION:
Do not use a fuse other than the type specified by
the manufacturer. Replacement of an incorrect fuse can result in
electrical fire and damage to the scaler, which will void the warranty.
