Gefen Pro 3GSDI, User Manual

Page: 22 / 48

18
RS-232 COMMANDS
Function Description
#aspect Sets the aspect ratio of the output signal
#autolock Enables or disables the automatic genlock mode
#blacklev Sets the black level (RGB/Y) of the output signal
#bright Sets the brightness value for a specific color
#cleanaper Sets the clean aperture level for position and size
#contrast Sets the contrast level for a specific color
#enhance
Sets the enhancement value
#extract Sets the extract aspect mode
#filmmode Enables / disables film mode
#gamma Sets the Gamma correction mode
#help Lists all available commands
#input Sets the input format of the image
#key
Execute the remote button actions as a string
#language Sets the current language of the OSD
#linkconfin Changes the input link configuration
#linkconfout Changes the output link configuration
#list Displays a list of all available commands on this Scaler
#motionthres Sets the intraframe motion detection threshold
#noisereduc
Sets the noise reduction value
#noisethres Sets the noise reduction threshold
#output Sets the format (refresh rate) of the output signal
#pattern Displays the specified test pattern
#rb Resets the scaler
#remotechan Sets the IR remote channel on the Scaler
#restore Restores all the default parameters on the Scaler
#save
Saves the current parameters in memory
#sizepos Sets the size and position of the image
#through Sets the through aspect ratio
#version Returns the version of the firmware and Kernel