Gefen Pro 3GSDI User Manual Download Page 3

Page: 3 / 48

ASKING FOR ASSISTANCE

Rev A1

Technical Support

Telephone

(818) 772-9100

(800) 545-6900

Fax

(818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday, Pacific Time

For 24 / 7 support, see the back of the product for the support number

Write To:

Gefen, LLC.

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefenpro.com

[email protected]

Notice

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any

accompanying documentation without prior written notice.

3GSDI to 3GSDI Scaler

is a trademark of Gefen, LLC

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing in the United States and other countries.

All trademarks are the property of their respective owners.

Summary of Contents for 3GSDI

















































Search results

Summary of Contents for 3GSDI

Reviews:

Related manuals for 3GSDI

Brands by name

Popular brands

Gefen Pro 3GSDI, User Manual

Search results

Summary of Contents for 3GSDI

Reviews:

Related manuals for 3GSDI

Brands by name

Popular brands