Gefen Pro 3GSDI, User Manual

Page: 11 / 48

IR REMOTE CONTROL INSTALLATION
7
Installing the Battery
The Remote Control unit ships with two batteries. One battery is required for operation and
the other battery is a spare.
1. Remove the battery cover on the back of the IR Remote Control unit.
2. Insert the included battery into the open battery slot. The positive (+) side of the
battery should be facing up.
3. Replace the battery cover.
Setting the IR Channel
The IR channel on the IR Remote Control must match the IR channel used by the 3GSDI
to 3GSDI Scaler. For example, if both DIP switches on the IR Remote Control unit are set
to IR channel 0 (both DIP switches down), then the 3GSDI to 3GSDI Scaler must also be
set to IR channel 0. See page 30 for information on how to change the IR channel on the
3GSDI to 3GSDI Scaler .
WARNING: Risk of explosion if battery is replaced by an incorrect
type . Dispose of used batteries according to the instructions.
Remote Channel 2: Remote Channel 3:
Channel 0 (default): Remote Channel 1:
Battery slot
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
DIP switches
NOTE: An Activity Indicator that flashes quickly while holding down
any one of the 8 buttons indicates a low battery. Replace the IR
Remote Control battery as soon as possible .