300 Z/ZP 2
Operation
BL144 GB 2019-11
37
4
Operation
The 300 Z/ZP 2 may only be operated by a qualified person appointed
by the operating company. This person must be familiar with the
operating manual, have sufficient experience and be informed about the
risks involved in handling lifting gear.
See chapter 1.8 Intended use
4.1
Safety during operation
•
Chapter 2 General safety information also has to be observed.
•
Load the platform as centrally as possible, observe the load capacity
of the machine.
-
The platform must always be loaded in such a manner that the
loading and unloading access points and the control point remain
accessible.
-
Position the load carefully on the platform; material that might
tend to slip or is higher than the platform, or which could fall over,
must be secured (consider the possibility of sudden winds).
-
Do not transport bulky parts that project over the side of the
platform.
•
Do not stand or work under the platform!
•
Do not place objects underneath the platform.
-
Store material at a safe distance of min. 50 cm (20") from moving
parts of the machine.
•
The landing level safety gates may only be opened once the
unloading ramp has been completely opened.
•
If the loaded platform stops during operation due to a malfunction, it
is the responsibility of the operator to recover the load. - Never leave
a loaded platform unattended!
•
Operation of the transport platform must cease under the following
conditions:
-
at temperatures below -20°C and above +40 °C.
-
in case of damage or other malfunctions.
-
A recurring inspection/intermediate inspection has been missed
(refer to the maintenance manual).
DANGER
Danger to life
Do not use in case of fire!
