Operation
300 Z/ZP 2
62
BL144 GB 2019-11
Use as a material hoist
The key switch on the platform control has to be set to "0". Key
removed.
The "Construction hoist" (external control) operating mode is
automatically activated when leaving the platform.
A green control light ("Construction hoist" operating mode) above the
platform control illuminates to confirm that this mode has been
activated.
Operation is carried out using the ground control (manual control)
outside the danger zone - or from the electric modules of the landing
level control when outside of the lower safety area.
•
When descending, the platform stops at the lower safety area. After
the platform operator has ensured that the travel path is clear, they
press and hold the
DOWN
button, then a signal is emitted. After
approx. 3 seconds, the platform moves and stops at the limit
switch.
•
Automatic operation is possible above the lower safety area-