300 Z/ZP 2
Operation
BL144 GB 2019-11
63
Use as a transport platform/climbing platform
For operation as a transport platform used to transport
passengers as per EN 16719, the following has to be installed:
•
a roof
•
on the building – a platform access with barrier which can be
operated with two separate actions
•
an underrun protection and barrier
or
•
a base enclosure
The platform is intended for temporary use on constructions sites for
transporting persons and materials. It may only be used by trained
personnel (platform operator) who receive the key to activate the
platform control.
To activate the platform control, insert the key into the key switch (5)
and briefly switch/turn.
A green control light (
"Construction hoist" operating mode
)
above the platform control lights up to confirm that this mode has
been activated.
•
The maximum number of persons on the platform is limited to 3 (incl.
platform operator).
•
Operation is only possible from the platform control in dead man’s
control. Other control locations are therefore disabled.
-
When descending, the platform stops at the lower safety area.
After the platform operator has made sure that the travel path
downwards is clear, they again press and hold the
DOWN
button, then a signal is emitted. After approx. 3 seconds, the
platform moves and stops at the
DOWN
limit switch.
•
It is possible to stop at any position (e.g. to carry out work from the
platform or to unload bulky components over the enclosure).
