300 Z/ZP 2
Operation
BL144 GB 2019-11
69
Electric module for landing level safety gate
The electric module must be installed on the landing level safety gates if
local regulations specify electrical monitoring of the landing level sliding
door or control of an upper stop position is required.
Control from the stop position is only possible in "Construction
hoist" operating mode and only above the lower safety area.
3
UP
button
4
DOWN
button
14
STOP
button (does not engage)
Additional equipment:
Extension cable 20 m
Fig. 42: Electric module for landing level
safety gate
Operation depends on the position of the selector switch (13) and
is identical to operation of the ground controls.
