300 Z/ZP 2
General safety information
BL144 GB 2019-11
19
2
General safety information
The machine has been designed and built according to the state of the
art and recognised safety rules.
Nevertheless, hazards for personnel or third parties and/or damage to
machinery and other tangible assets can occur during use, e.g. if the
machine:
•
is operated by untrained or uninstructed personnel,
•
is not used for the intended purpose,
•
is assembled, operated and serviced inappropriately.
Attached notices and warning signs must be observed!
Consequences of failure to comply with safety instructions
Failure to comply with safety instructions can result in hazards for
personnel as well as for the environment and the machine. Failure to
comply can lead to any claims for damages becoming invalid.
2.1
Residual risks
Residual risks remain from handling the machinery even when all safety
conditions are complied with.
Anyone who works on and with the machine must be aware of these
hazards and follow instructions that prevent these residual risks leading
to accidents or damage.
•
Do not remove any safety labels; replace any safety instructions that
have become illegible.
•
Hazard from improperly secured loads falling.
•
Hazard when entering and leaving the platform.
•
Hazard from damage to the mast sections, anchors or base unit.
•
Hazard when working on the electrical system.
•
Hazard from malfunctions in the control system.
•
Hazards from uncoordinated working practices.
•
Risk to persons by operating the platform with no cordoned- off
area/base enclosure.
•
Hazard from high wind speeds > 72 km/h.
