MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 31 -
Decode UPC/EAN/JAN Supplementals
Decode UPC/EAN/JAN Supplementals
Decode UPC/EAN/JAN Supplementals
Decode UPC/EAN/JAN Supplementals
Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN
13+2). Six options are available.
• If Decode UPC/EAN/JAN Only With Supplementals is selected, UPC/EAN/JAN symbols without supplementals
are not decoded.
• If Ignore Supplementals is selected, and the decoder is presented with a UPC/EAN/JAN with a supplemental, the
UPC/EAN/JAN is decoded and the supplemental bar code is ignored.
• An Autodiscriminate Option is also available. If this option is selected, choose an appropriate UPC/EAN/JAN
Supplemental Redundancy value from the next page. A value of 5 or more is recommended.
• Enable 378/379 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’ or ‘379’
prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are
reported instantly upon decode.
• Select Enable 978 Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘978’ prefix by the
supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search and are reported
instantly upon decode.
• Select Enable Smart Supplemental Mode to delay only EAN-13/JAN-13 bar codes starting with a ‘378’, ‘379’, or
‘978’ prefix by the supplemental search process. All other UPC/EAN/JAN bar codes are exempt from the search
and are reported instantly upon decode.
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.
Decode UPC/EAN/JAN Only With Supplementals
* Ignore Supplementals
Autodiscriminate UPC/EAN/JAN Supplementals