GECMA BCSi-1 series, Operating Manual

Page: 48 / 89

MANUAL BCSI-1 REV 1.8 EN.DOC 19.12.08 A.J. - 48 -
Set Lengths for Code 1 Set Lengths for Code 1 Set Lengths for Code 1 Set Lengths for Code 11 1 1 1
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific
range.
• One Discret
One Discret One Discret One Discrete Length e Length e Length e Length - Select this option to decode only Code 11 symbols containing a selected length. Select the
length using the numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode only Code 11
symbols with 14 characters, scan Code 11
Code 11 Code 11 Code 11 ---- One Di One Di One Di One Discrete Length screte Length screte Length screte Length, then scan 1 1 1 1 followed by 4 4 4 4. To correct an error or
change a selection, scan Cancel Cancel Cancel Cancel from Appendix A.
• Two Discrete Lengths
Two Discrete Lengths Two Discrete Lengths
Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected
lengths. Select lengths using the numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode
only those Code 11 symbols containing either 2 or 14 characters, select Code 11
Code 11 Code 11 Code 11 ---- Two Discrete Lengths Two Discrete Lengths Two Discrete Lengths Two Discrete Lengths, then scan
0 0 0 0, 2 2 2 2, 1 1 1 1, and then 4 4 4 4. To correct an error or change a selection, scan Cancel Cancel Cancel Cancel from Appendix A.
• Length Within Range
Length Within Range Length Within Range
Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. Select lengths
using numeric bar codes in Appendix A, Numeric Bar Codes. For example, to decode Code 11 symbols containing
between 4 and 12 characters, first scan Code 11
Code 11 Code 11
Code 11 ---- Length Within Range
Length Within Range Length Within Range
Length Within Range. Then scan 0
0 0
0, 4
4 4
4, 1
1 1
1, and 2
2 2
2 (single digit
numbers must always be preceded by a leading zero). To correct an error or change a selection, scan Cancel
Cancel Cancel
Cancel from
Appendix A.
• Any Length Any Length Any Length Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the
decoder capability.
Code 11 – One Discrete Length
Code 11 – Two Discrete Lengths
Code 11 – Length Within Range
Code 11 – Any Length