MANUAL BCSI-1 REV 1.8 EN.DOC
19.12.08
A.J.
- 45 -
Transmit Code
Transmit Code
Transmit Code
Transmit Code 39 Check Digit
39 Check Digit
39 Check Digit
39 Check Digit
Scan a bar code below to transmit Code 39 data with or without the check digit.
Code 39 Check Digit Verification must be enabled for this parameter to function.
Transmit Code 39 Check Digit (Enable)
* Do Not Transmit Code 39 Check Digit (Disable)
Code 39 Full ASCII Conversion
Code 39 Full ASCII Conversion
Code 39 Full ASCII Conversion
Code 39 Full ASCII Conversion
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable
or disable Code 39 Full ASCII, scan the appropriate bar code below.
Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent, and is therefore described in the ASCII Character
Set Table for the appropriate interface. See Appendix A, ASCII Character Set.
Enable Code 39 Full ASCII
* Disable Code 39 Full ASCII