CONTROL ELEMENTS
CONTROL ELEMENTS
FRONT PANEL
NOTES:
Regardless of the HPF switch setting, the mixing console does not apply
this HPF to the LINE inputs of STEREO input channels.
______________________________________________________________________________________
2
2
© GECKO MUSIC GROUP. All Rights Reserved.
1
ON
ON
ON
ON
ON
ON
CHANNEL CONTROL SECTION
2
3
4
5
6
7
8
9
10
11
12
1. GAIN CONTROL
This control
adjusts the sensitivity of both
MIC (XLR) and LINE (¼” TRS) inputs. Both
the MIC and LINE inputs are electronically
balanced, and are located on the rear
connector panel.
The -60 to -16 scale indicates the MIC input
adjustment level. The –34 to +10 scale
indicates the LINE input adjustment level.
The EXODUS GAIN structure employs the
revolutionary GECKO® C.R.I.S.T.A.L.®
Audiophile PreAmps technology.
2. PEAK LED
The PEAK LED detects the peak level of
the post-equalizer signal, and lights up red
when the level reaches 3dB below the
clipping level. On stereo input channels
equipped with XLR (female) MIC inputs
(Channels 9/10 and 11/12), the PEAK LED
detects both the post-equalizer and post-
preamp peak levels, and lights up red if
either of these levels reaches 3dB below
the clipping level.
3. HIGH PASS FILTER (HPF) SWITCH
This switch toggles the HPF ON or OFF. To
turn the HPF ON, press the switch in. The
HPF cuts frequencies below 80Hz.
Channels 1 to 8
(Monaural)
Channels 9/10, 11/12, 13/14, 15/16
(Stereo)
