12. CHANNEL FADER
Adjusts the output level of the channel's input signal. Use these faders to adjust the volume balance among
the various channels.
NOTES:
To reduce noise, set the fader sliders for unused channels all the way
down. Always ensure that you work with clean sources.
MASTER CONTROL SECTION
______________________________________________________________________________________
5
5
© GECKO MUSIC GROUP. All Rights Reserved.
13. ST (STEREO) MASTER FADER
Adjusts the signal level to the STEREO OUT (ST OUT) output
connectors.
14. GROUP FADERS (1-2, 3-4)
Adjusts the signal level to the GROUP OUT 1 to 4 output
connectors.
15. TO ST SWITCH
If this switch is ON (pressed in), the mixing console sends the
signals processed by the GROUP FADERS [14] onto the ST
(STEREO) bus. The GROUP 1/3 signals go to STEREO L and
the GROUP 2/4 signals go to STEREO R.
16. MASTER SEND
AUX1 / AUX2 CONTROLS
Adjust the level of the signal output to the AUX1 SEND and
AUX2 SEND
output connectors.
MASTER EFFECT CONTROL
Adjusts the level of the signal on the EFFECT bus. This is the
signal that is output through the EFFECT
output connectors.
13
14
15
16
17
18
20
21
22
23
19
POWER
ST
R
L
PEAK
+5
+3
+1
0
-1
-3
-5
-7
-10
-15
-20
24
25
26
NOTES:
These
MASTER
SEND
controls do not affect the level of the
signal sent from the internal digital
effects processor onto the MASTER
EFFECT bus.
ON
