38. AC ADAPTOR
For GECKO® EXODUS MXR 1604DSP, use the included power adaptor. For GECKO® EXODUS MXR
3204DSP, use the built-in power cord.
WARNING:
Be sure to verify your actual line voltage is the same as the voltage level
required by your mixing console. Connection to an inappropriate power source may
result in fire or electric shock, and extensive damage which is not covered by the
warranty.
MAKING CONNECTIONS
MAKING CONNECTIONS
The GECKO® EXODUS MXR 1604DSP / MXR 3204DSP can be used for many professional applications in
both live and studio settings.
For all connections, refer to the following steps:
1. Before connecting to microphones and instruments, be sure that all devices are turned OFF. Also be
sure that all of the mixing console's channel faders and master control faders are set all the way
down.
2. For each connection, connect one end of the cable to the relevant microphone or instrument and
connect the other end to the appropriate LINE or MIC connector on the mixing console. Where an
input channel provides both a MIC connector and a LINE connector, you may use either one of these
connectors but you must not use both at the same time. Please connect to only one of these
connectors on each channel.
3. Make connections using quality audio cables (i.e. GECKO® TRUTH T3AL) and connectors (i.e.
GECKO® OLYMPIAN connectors) according to your requirements.
4. To avoid causing damage to speakers, power up the devices in the following order: Peripheral
devices → mixing console → power amplifiers (or powered speakers). When shutting the system
down, turn OFF the power in the reverse order: Power amplifiers (powered speakers) → mixing
console → peripheral devices.
5. Although it requires no special ventilation, ambient temperatures should not exceed 113°F (45°C)
when equipment is powered.
MOUNTING YOUR MIXING CONSOLE
MOUNTING YOUR MIXING CONSOLE
For mixing console mounting, refer to the following steps:
1. Two metal rack-mount supports are screwed onto the unit. Use a screwdriver to remove these
supports.
2. Turn the supports over, and fasten them into place again using the same screws.
3. Mount the unit into the rack, and fasten it into place.
______________________________________________________________________________________
11
11
© GECKO MUSIC GROUP. All Rights Reserved.
