Gecko Aeware 3 in.clear, User Instructions And Functions

Page: 20 / 25

39 38
in.clear in.clear
When you add BromiCharge™ to your spa, the TDS (Total
Dissolved Solids) of the water will increase about 1150 PPM (Parts
Per Million) per 100-U.S. gallons for every pound of BromiCharge™
added. Normal operating range of BromiCharge™ should be
between 1400 to 1500 PPM for best results.
By adding 1.2 pounds of BromiCharge™ per 100 U.S. gallons of
water you should increase the total TDS in your spa by 1440 PPM.
EXAMPLE: If you have a 300 U.S. gallon spa, add 3.5 lbs of
BromiCharge™.
BASE TDS ..........................................400 PPM
3.5 lbs. BromiCharge™ ..................1440 PPM
TOTAL PPM after BromiCharge™ . 1840 PPM
Adding BromiCharge™
You will want to maintain a TOTAL TDS of 1600 to 1900 PPM in
your spa for best performance based on the above example. This
will give you a 1400 to 1500 PPM of BromiCharge™ in your spa at
all times.
IDEAL WATER CHEMISTRY FOR SPA WATER
BromiCharge™ ..Add 1.2 pounds per 100 U.S. gallons of water (1440
PPM)
Calcium Hardness - CaCo: ................... 125 to 200 adjust if necessary
Alkalinity..................................................... 80 to 90 adjust if necessary
pH ................................................................7.0 to 7.8 adjust if necessary
Adjust the above factors to meet optimum range values.
user guide for BromiCharge
™
user guide for BromiCharge
™
Operation Instructions
IMPORTANT: Read instructions before using.
SPA BROMINE GENERATOR
INSTALL AND OPERATION
MANUAL
The purpose of the in.clear™ water sanitation system for spas and
hot tubs (with BROMITRON™ BROMINE GENERATOR technology)
is to reliably and automatically maintain a halogen presence in
a given recreational body of water, whether the hot tub owner
remembers to treat the water, or not.
Proper bromine levels and chemistry should be checked regularly
by hot tub owners with the use of a standardized test kit.
The in.clear™ water sanitation system for spas and hot tubs (with
BROMITRON™ BROMINE GENERATOR) should be installed before
your hot tub is filled with water. If this is an after market installation,
drain the water and install it in the return line after the heater
circulation pump.
BromiCharge™
for use with the
with BROMITRON ™
Bromine Generator Technology