Gecko Aeware 3 in.clear, User Instructions And Functions

Page: 14 / 25

27 26
in.clear in.clear in.clear
™
keypad operations
Keypad functions
On/Off & Boost
key
Maintenance
Diagnostic
key
Down key Up key
Bromine
generator
ON indicator
lo hi
BromiCharge™ gauge
keypad operations
Boost key
The first press of the Boost
key turns the in.clear™
ON and puts the in.clear™
into maintenance mode. ON
appears on the keypad display.
Press and hold the Boost
key for 2 seconds to turn
in.clear™ OFF. OFF will appear
on the keypad display.
With the system in
Maintenance Mode, press the
Boost key to activate the
Boost Mode.
Note: The Boost mode should
be activated every time you use
your spa.
The keypad display will show a
numeric value that corresponds
to the selected level. There are
8 possible levels available with
the Boost Mode.
As a rule of thumb, the Boost
level corresponds to the
number of bathers using the
spa.
Set the Boost level by using the
up and down arrow to
select the number of bathers
that use the spa (i.e., husband
and wife = 2, and so on).
Confirm the selection by
pressing the Boost key again
or wait 5 seconds for the system
to save the desired level and
activate the Boost Mode cycle.
Note: In.clear™ keeps your
boost level in memory.
Press the Boost key during
a Boost cycle will cancel the
remainder of that Boost cycle
and return the in.clear™ system
to maintenance mode.
The Bromine Generation
Indicator (LED), located above
the Boost key, lights up when
the cell is producing bromine
and is OFF when no bromine is
being produced.
Note: The Bromine Generation
Indicator will blink if the
in.clear™ system cannot
generate bromine due to low or
no water flow.