Geca Roma Wi-Fi, Complete Manual

Page: 21 / 60

L U
+H -H
L U
+H
-H
+H
G I
MANUAL PROGRAM
To activate the display, just touch it.
Press the “ ” button for about 2 seconds (Fig. 55) to enable MANUAL mode.
The Roma Wi-Fi now behaves as a simple room thermostat.
Touch “
+C
” or “
-C
” (Fig. 56) to increase or decrease the TEMPERATURE by 0.2°C inWINTER
and SUMMER.
Press “
+C
” or “
-C
” to change the temperature by 1.0 °C.
After a few seconds without any operation, or if you simply touch the TEMPERATURE area, the
MANUAL screen returns.
If the target temperature is higher than the measured temperature, the SYSTEM POWER CON-
TACT symbol is shown “
” (Fig. 57).
To exit MANUAL programming, press the “ ” button for 2 seconds.
Fig. 55 Fig. 56 Fig. 57
MINUTES: press the MINUTES area and use “
-H
” and “
+H
”
the set the MINUTES (Fig. 52).
DATE: press the DATE area and use “
-H
” and “
+H
” the set the
current DAY (Fig. 53).
After programming the HOUR , the MINUTES and DAY , confirm
the settings by pressing the TEMPERATURE area. (Fig. 54)
21
Fig. 52
Fig. 53
Fig. 54
+H -H
+C
L U
-C
+C