Geberit ACO 102, Operation Manual

Page: 13 / 208

Function
B1
02
4
-00
1 ©
01
-2
01
2
13
DE
EN
FR
IT
NL
ES
PT
DK
NO
SE
FI
IS
PL
HU
SK
CZ
SL
HR
SR
EE
LV
LT
BG
RO
GR
TR
RU
AE
CN
JP
1 Start button
2 Red LED
3 Green LED
4 Charge level indicator
5 Unlocking button
6 Swivelling pressing head
Automatic pressing function
The pressing tool functions electrohydraulically. An automatic pressing function makes sure that the pressed joint is
completely finished. The automatic pressing function does not switch on until approx. one second later. After the
automatic pressing function has switched on, the green LED [3] goes out and the pressing sequence proceeds
automatically. The pressing sequence can only be interrupted by pressing and holding the unlocking button [5]. When the
pressing sequence is finished, the motor automatically switches off and the green LED [3] lights up again.
If the start button [1] is released before the automatic pressing function switches on, the piston in the pressing tool will
move back to its starting position. The pressing sequence is not finished and must be restarted.
Unlocking button [5]
The pressing sequence can be interrupted by pressing and holding the unlocking button [5]. The piston in the pressing
tool moves back to its starting position. Pressing the start button [1] again causes the pressing sequence to be resumed.
LED display [2] [3]
The two LEDs [2] [3] show the operating states of the pressing tool. The pressing tool is ready for operation when the
green LED [3] is lit. The red LED [2] or the flashing green LED [3] indicate malfunctions.
Charge level indicator [4]
The four green LEDs [4] show the charge level of the rechargeable battery. The number of lit LEDs indicates the charge
level. The rechargeable battery is empty when the green LED [3] flashes.
Swivelling pressing head [6]
The pressing tool has a swivelling pressing head that can swivel 180°. This can only be turned before pressing. To turn
the pressing head, hold the grip area of the pressing tool and turn the front part of the pressing cylinder.
Standby mode
If the pressing tool is not used for 30 minutes, it switches to standby mode. No LED is lit. To start the pressing tool, briefly
press the start button [1].
Function
1
2 3
4
5
6