SAFETY
7
STARTING AND STOPPING SAFETY
Check the tractor master shield over the PTO stub shaft. Make sure it is in good condition
and fastened securely to the tractor. Purchase a new shield if old shield is damaged or
missing.
All tractors that are not equipped with a "live" power take-off (PTO) need to be equipped
with an over-running PTO clutch. These are available through most farm equipment stores.
NOTE:
The addition of an over-running PTO clutch may change the length of the PTO
driveline required. Pay extra attention to the instructions on the
PTO Driveline Installa-
tion.
Be sure that the driveline system guarding is adequate.
Tiller operating power is supplied from the tractor PTO. Refer to your tractor manual for
PTO engagement and disengagement instructions. Know how to stop tractor and tiller
quickly in case of an emergency.
When engaging PTO, the engine RPM should always be at idle speed. Once engaged and
ready to start tilling, raise PTO speed to 540-RPM and maintain throughout tilling opera-
tion.
