XB ROTARY TILLER ASSEMBLY
12
ASSEMBLY INSTRUCTIONS
STEP 1:
With rotary tiller still in crate, lay flat on a level surface. Cut banding straps on the two (2) upright
crate posts.
STEP 2:
Remove the top and upper side sections of the crate, leaving the rotary tiller resting on the bottom
section.
STEP 3:
Remove tie wire holding the PTO shaft and set aside PTO.
STEP 4:
Attach tiller according to your tractors manual and using the instructions on pages 16 and 17.
STEP 5:
Install tail back plate chain.
STEP 6:
Install PTO shaft as outlined in the
Attaching to Tractor Section
, Pgs 16-19.
NOTE: The safety chains on the PTO shaft should be attached to the tractor and tiller to
prevent the plastic safety shield from rotating.
