background image

350A4502P760

17

 For The Period Of:  Mabe Will Replace:

One Year

 

Any part

 of the range hood which fails due to a defect in materials or workmanship .  

From the date of the

 

During this 

limited one-year warranty

, Mabe will also provide, 

free of charge

, all labor and  

original purchase

 

in-home service to replace the defective part .

n

 Service trips to your home to teach you how to use  

the product.

n

 Improper installation, delivery or maintenance.

n

 Failure of the product if it is abused, misused, or used for 

other than the intended purpose or used commercially.

n

 Replacement of house fuses or resetting of circuit breakers.

n

 Damage to the product caused by accident, fire, floods  

or acts of God.

n

 Incidental or consequential damage caused by possible 

defects with this appliance.

n

 Incidental or consequential damage caused by possible 

defects with this appliance.

n

 Damage caused after delivery.

n

 Product not accessible to provide required service.

 What Mabe Will Not Cover:

This warranty is extended to the original purchaser and any succeeding owner for products purchased for 

home use within Canada. If the product is located in an area where service by a Mabe Authorized Servicer is not 

available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized 

Mabe Service Location for service.

Some provinces do not allow the exclusion or limitation of incidental or consequential damages. This warranty 

gives you specific legal rights, and you may also have other rights which vary from province to province.  

To know what your legal rights are, consult your local or provincial consumer affairs office or your province’s 

Attorney General.

Warrantor: MC Commercial Inc. Burlington, Ontario

All warranty service provided by our Factory Service Centers, or an 

authorized Customer Care

®

 technician. To schedule service, visit us 

on-line at GEAppliances.ca, or call 800.561.3344.

Please have serial number and model number available when 

calling for service.

Staple your receipt here. 

Proof of the original purchase 

date is needed to obtain service 

under the warranty.

EXCLUSION OF IMPLIED WARRANTIESYour sole and exclusive remedy is product repair as provided in 

this Limited Warranty. Any implied warranties, including the implied warranties of merchantability or 

fitness for a particular purpose, are limited to one year or the shortest period allowed by law.

 

GE Range Hood Warranty.

Summary of Contents for JVE330



















Reviews: