manualshive.com logo in svg

GE T8, Basic Service Manual

Share
Download
GE T8 Basic Service Manual Download Page 289

Loading the software

Vivid T9/Vivid T8 – Basic Service Manual

8-31

5795591-100 English Rev. 3

8-4-9 Option Strings Check

NOTE: 

After the system software loading completion, please check the 
option strings to ensure that the options are activated and 
working.

1.  Reboot the system.
2.  Press 

Config (F2)

 

on the control panel.

3.  Select 

Admin

 -> 

System Admin

.

4.  Ensure that all the installed option keys are displayed and 

the status of Options are valid.

• 

The status “Valid” means the option keys are activated 
and working.

• 

The status “disabled” means the option keys are not 
activated and not working. Check if the option is 
installed and if the serial number and option key are 
correct.

 Figure 8-20. Software Option

Summary of Contents for T8






























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands