Operating Instructions
36
T2100-ST1 Treadmill, 110V / T2100-ST2 Treadmill, 220V
2097937-001 Rev E
12 June 2017
Controlling the Treadmill
Turn the power switch On (I).
Use the controlling equipment to start the treadmill, adjust
the treadmill speed and grade, proceed through exercise
phases, terminate the exercise session, and turn off the
treadmill. Refer to the appropriate controlling equipment
Operator Manual for instructions.
Power Switch
The power switch controls the AC power to the treadmill. The On
position (I) applies power. The Off position (0) removes power.
Emergency Stop Switch
The emergency stop switch is a safety device for use in emergency
situations to stop the treadmill. Press the STOP push-button and the
treadmill will coast to a stop.
To release the emergency stop switch, turn the push button ¼-turn
in counter clockwise direction. The treadmill will return to 0.0%
elevation.
Emergency Stop Switch Check
NOTE:
Verify proper operation of the stop switch assembly every
month.
With the belt moving at a relatively high speed,
press the emergency stop switch. The treadmill will
coast to a stop. To release the emergency stop
switch, turn the push button ¼-turn in counter
clockwise direction. The treadmill will return to
0.0% elevation.
Use the controlling equipment to terminate the
exercise session and turn off the treadmill.
Pull Tether Switch
The pull tether switch is a safety device for patient safety use in
emergency situations to stop the treadmill. Pull the pull tether strap
the treadmill will have a controlled stop.
To re-attach the pull tether, attach clip to the original position on
the switch. The treadmill will return to 0.0% elevation.
