1
Introduction
This is the GE
SymVeo IP Camera User Manual
for model SV-
XP1. This document includes detailed instructions explaining:
•
how to setup and install the IP Camera and
•
how to change the IP address
There is also information describing how to contact technical
support if you have questions. To use this document effectively,
you should meet the following minimum qualifications:
•
a basic knowledge of CCTV systems and components; and
•
a basic knowledge of electrical wiring and low-voltage
electrical connections; and
•
a basic knowledge of networking and IP addressing.
Read these instructions and all ancillary documentation entirely
before installing or operating this product.
Note:
A qualified service person, complying with all applicable codes,
should perform whatever hardware installation is required.
