21
Figure 13. AIS Menu
To adjust the level and threshold defaults of a lens mode do the
following:
1. With the selected light control option (lens mode) still
highlighted (AIS or AES), press the bottom selection
button to enter the AIS or AES menu.
2. At the AIS or AES menu, use the up and down buttons to
move between the level and threshold scales and use the
right and left buttons to adjust the markers on the scales.
3. Move to the PREVIOUS PAGE option and press to leave
the current menu.
ADJUSTING THE AUTOMATIC GAIN CONTROL (AGC)
To reduce the amplitude decay of an electronic signal and the
resulting noise in images, you can adjust the maximum value for
the gain control. This camera provides both automatic and
manual control adjustments for the predetermined margins that
regulate the voltage level. To set the AGC mode do the following:
