SymVeo IP Camera
User Manual
12
2. Refer to
Figure 8
on page 15 of this document. Press the
up
button for around three seconds on the back of the
camera, bringing up the
Network Settings Menu
.
3. Configure the IP address, Network Mask and Gateway by
using the
enter menu
button to move in and out of each
setting, the right and left buttons to move the cursor back
and forth within each setting, and the up and down
buttons to change the number in each space. The
up
,
down
,
left
, and
right
buttons take continuous effect in
this menu.
4. Once you have properly configured the IP address on the
On Screen Display, move the cursor to the
Save
function
and click on the
enter menu
button on the back of the
camera.
5. The camera will reboot with the new IP settings, and you
should be able to access the camera via Internet Explorer
or equivalent web browser.
Figure 6. The IP address menu
