Simon Security System
51
•
Dirt or dust may be causing the problem. Wipe the sensor with a clean, damp cloth.
X10 Modules
All Lamp Modules or Siren not working.
•
Be sure the panel transformer is plugged into an outlet that is not controlled by a
switch.
•
Check that the panel is powered using the line carrier power transformer.
•
House code was programmed incorrectly.
One Lamp Module or Siren is not working.
•
Unplug nearby equipment that may be causing interference (light dimmer switches,
televisions, appliances with older motors).
•
Check that the switch on the lamp or appliance is turned on and remains on.
•
Make sure the lamp has a working bulb.
•
Make sure the lamp or appliance is plugged into the Lamp/Appliance Module, the
Module is plugged into the outlet and the outlet is not controlled by a switch.
•
Make sure the House and Unit Codes are correct.
•
Move the Module to a different outlet that is on the same phase (branch) of the
household electrical circuit as the panel.
Time or sensor activated light not working.
•
Make sure you have programmed the light to be activated by a timer or sensor.
•
Make sure the system clock is set.
•
Make sure these functions have been enabled by pressing the LIGHTS Time Acti-
vated/Sensor Activated button on the panel. The functions are enabled if the button
is lit.
Summary of Contents for Simon Security System
Page 66: ...Simon Security System 59...
Page 67: ...Simon Security System 60...
