Simon Security System
35
¾
To reset Status Beep Volume (return to default), press:
Delete—Option #—55—DONE.
Option 56: Call Waiting (Default = off)
Lets you program up to a 26-digit number or code that disables call waiting or any other
phone service before dialing central station, pager, or voice event notification phone
numbers (on). When this option is turned off, the panel dials only the central station or
pager phone numbers.
Press Test for each required pause, Add for a *, and Delete for a # (each of which uses
one of the 26 available places).
Note
Pressing DONE is required if
you enter fewer than 26 dig-
its. The phone number is
automatically stored without
pressing DONE if all 26
places are used.
¾
To program Call Waiting, press:
Add—Option #—56—Up to 26 digits—DONE.
¾
To delete Call Waiting, press:
Delete—Option #—56—DONE.
Option 57: Supervisory/Tamper Report (Default = off)
Determines whether the panel sends supervisory reports to a central station as a tamper
(on) or a supervisory (off).
Note
This option is typically used
only in Europe where a
supervisory condition is
required to report as a
tamper.
¾
To report supervisories as Tamper Reports, press:
Add—Option #—57—DONE.
¾
To report supervisories as Supervisory Reports, press:
Delete—Option #—57—DONE.
Option 58: Remote Touchpad Arming (Default = off)
Determines whether keychain and remote touchpads can disarm the system only during
exit and entry delays (on), or arm and disarm the system anytime (off).
¾
To turn on Remote Touchpad Arming, press:
Add—Option #—58—DONE.
¾
To turn off Remote Touchpad Arming, press:
Delete—Option #—58—DONE.
Option 59: Exit Extension (Default = on)
Note
Option 38 must be ON for
exit extension to work.
Determines whether the panel restarts the exit delay time if the user enters the armed
premises during the initial exit delay period (on), or not (off).
Turning on this feature allows users to re-enter during the exit delay period, without dis-
arming and then re-arming the system. Turning off this feature requires the user to dis-
arm and re-arm the system.
Note
For UL listed systems, Exit
Extension must be off.
¾
To turn on Exit Extension, press:
Add—Option #—59—DONE.
¾
To turn off Exit Extension, press:
Delete—Option #—59—DONE.
If this option and Option 28 (No Delay from Keychain Touchpad) is on, users
!
cannot enter and/or disarm using remote touchpads without causing an alarm.
Caution
!
Summary of Contents for Simon Security System
Page 66: ...Simon Security System 59...
Page 67: ...Simon Security System 60...
