background image

REGULATORY INFORMATION
FCC/IC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Labelling: Changes or modifications to this unit not expressly approved by the manufacturer could void the user’s authority 
to operate the equipment. 
ConnectPlus module only (or similar communication module)
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of separation distance between 
the ConnectPlus device and the user’s body must be maintained at all times.

*Select Models Only

About Appliance Communication 

GE WiFi Connect (for customers in the United States):
GE WiFi Connect Enabled*

Your refrigerator is GE WiFi Connect Enabled. A WiFi communication card is built into the product allowing it 
to communicate with your Smart Phone for remote monitoring, control, and notifications. Please visit www.
GEAppliances.com/connect
 to learn more about connected appliance features, and to learn what connected 
appliance App’s will work with your Smart Phone.

GE WiFi Connect Optional *

You refrigerator is GE WiFi Connect compatible using the GE ConnectPlus module that is provided with your 
refrigerator.  To connect this appliance to the internet you will need to attach the module to your appliance through 
the communication port in the appliance.  The GE ConnectPlus will allow your appliance to communicate with your 
smart phone for remote appliance monitoring, control and notifications.  Please visit www.GEAppliances.com/
connect 
to learn more about connected appliance features, to learn what connected appliance App’s will work with 
your Smart Phone and to learn where you can purchase a GE ConnectPlus.

WiFi Connectivity: For assistance with the appliance or the ConnectPlus network connectivity (for models that are WiFi 
enabled or WiFi optional), please call 1-800-220-6899.

12

Summary of Contents for Profile















































Reviews: