– 55 –
Display Board
The display board is mounted on the underside of
the plastic housing that holds the control board
assembly. The display board snaps onto the plastic
housing via 2 plastic tabs.
To remove the display board:
Caution:
To avoid marring the control panel, place
the panel face down on a protective surface.
Remove the control and top panels. (See
1.
Control
Panel
and
Top Panel
.
)
Remove the 5 Phillips-head screws that attach
2.
the control board plastic housing to the control
panel. Remove the housing.
4. Remove the wire harness.
5. Release the display board from the 2 plastic
tabs that attach the display board to the plastic
housing.
3. Turn the plastic housing over to expose the
display board.
Tab
Tab
Display Board
Summary of Contents for Profile DPVH880EJ
Page 27: ... 27 Airflow Gas Dryer Electric Dryer ...
Page 31: ... 31 Control Board Assembly Electric and Gas Models Front View Rear View J3 ...
Page 66: ... 66 Drum Motor Circuit Electric Models Drum Motor Circuit Gas Models ...
Page 67: ... 67 Blower Motor Circuit Electric Models Blower Motor Circuit Gas Models Gas Valve Circuit ...