GE Profile DPVH880EJ, Technical Service Manual, Page: 12 / 68

– 12 –
Dryer Features
Drum Lamp
Before replacing the light bulb, be sure to unplug the dryer power
cord or disconnect the dryer at the household distribution panel by
removing the fuse or switching off the circuit breaker. The bulb is a
120 VAC, 10-watt, threaded base bulb. Reach above dryer opening
from inside the drum. Remove the bulb and replace with the same
size bulb (Part # WE4M305).
Built-in Rack Dry System™ with Tumble Care Baffl es™
A handy drying rack may be used for drying items, such as tennis
shoes. Place items
fl at on the drying rack and block such items as
wool sweaters and delicate fabrics. Dry with low heat.
To install the Built-in Rack Dry System™ with Tumble Care
Baffl es™
Make sure the drum of the dryer is oriented so the rack drying 1.
system is on the left side of the dryer.
Pull the drying rack screen out from the left side and engage the 2.
handle “post” in the opposite baf fl e slots.
Place the garment on the rack and close the door. 3.
Press the 4. DRYER RACK button.
Select desired TIME. 5.
Press the 6. START/PAUSE button.
Note:
On electric models, if the drum light is activated by selecting •
DRUM LIGHT on the control panel during the rack dry cycle,
heater operation will stop.
Do not use this drying rack when there are other clothes in the •
dryer.
Make sure to detach the drying rack at the end of the cycle. •
( Continued Next Page )
_________________________________________________________________________________________
Bulb