GE Profile DPVH880EJ, Technical Service Manual, Page: 11 / 68

– 11 –
Settings
Under the SETTINGS option, you can
adjust the volume or the brightness of
the display.
VOLUME
■
End of Cycle (signal) volume can be set
from
HIGH , MED , LOW or OFF .
■
Control Sounds volume can be set from
HIGH , MED , LOW or OFF .
DISPLAY BRIGHTNESS can be set from
HIGH , MED or LOW .
After you have made your selection,
press enter.
Sales Demo Mode
This mode allows the user to view a dryer cycle.
When in the sales mode, it will not operate through
normal cycles, but will simulate those cycles
electronically on the display.
TO ENTER DEMO MODE:
Unplug dryer. Reconnect power. 1.
Within 30 seconds of plugging unit in, open 2.
door and press START/PAUSE 4 times within 3
seconds.
DEMO MODE ENTRY 3. will appear on display.
TO EXIT DEMO MODE:
Unplug dryer. Reconnect power. 1.
Within 30 seconds of plugging unit in, open 2.
door and press START/PAUSE 4 times within 3
seconds.
DEMO MODE EXIT 3. will appear on display.
Once in Demo mode, if there are no key presses, the
display will begin to scroll
“DEMO MODE – TRY ME” .