GE Energy Motors GEEP-427-I Copyright 2009, The General Electric Company, USA
4
GEEP-427-I Pegasus, Horizontal Induction Motor
TEWAC, Sleeve Bearing
Reference Publications and
Standards
ANSI/NEMA MG-2
Safety Standards for construction
and Guide for Selection,
installation and Use of Electric
Motors and Generators.
ANSI
C50.10
General Requirements for
Synchronous Machines.
IEEE
1
General Principles for
Temperature Limits in Rating of
Electrical Equipment.
IEEE
85
Test Procedure for Air-borne
Noise Measurements on Rotating
Machinery.
IEEE
112
Test Procedure for Polyphase
Induction Motors and Generators.
IEEE 115
Test Procedures for Synchronous
Machines.
Standards can be obtained by writing to the following:
National Electrical Manufacturers Association
2101 Street, N.W.
Washington, DC 20037
American National Standards Institute
1430 Broadway
New York, NY 10018
Attention: Sales Department
The Institute of Electrical and Electronics Engineers,
Inc.
445 Hoes Lane
Piscataway, NJ 08854
Attention: Publication Sales
Warranty considerations
The warranty coverage applicable to the
equipment specified under “Identification of Unit” may
be found in the corresponding sales contract.
The equipment must be operated in accordance
with nameplate specifications, applicable standards and
codes, and in accordance with this instruction manual for
the warranty to remain in effect during the warranty
period.
If a question or circumstance not covered by the
instruction manual occurs, or should a problem occur,
contact the nearest General Electric Technical Service
representative.
Summary of Contents for Pegasus MHV GEEP-427-I
Page 46: ...GE Energy Motors 46 ...
