GE PanaFlow HT, User Manual

Page: 56 / 163

Chapter 3. Initial Setup and Programming
46 PanaFlow HT User’s Manual
3.6.2d Density
To calculate Mass Flow, you must enter Actual Density. To measure Volumetric
(Std.), you must enter Actual Density and the Reference Density. To check and/or
change density values, under
UserPref/Flow Units
, use the [

] or [

] arrow key
to select
Density
and press
[

]
. The following screen appears.
To exit the Totalizer setup procedure, use the [

] or [

] arrow key to select
No
and press
[

]
. The screen returns to the previous display. To continue setting up the
Totalizer, select
Yes
, press
[

]
and a screen similar to the following appears.
If no change is required, press
[

].
If change is required, select the appropriate
measurement category, and press
Enter
. A screen similar to the following appears.
If no change is required, press
[

]
. If change is required, select the appropriate
measurement type, press
[

]
, and the display returns to the previous screen. Press
the [

] k
ey twice to return to the
UserPref/Flow Units
screen.
Density / Density
Lb/Ft^3