GE PanaFlow HT, User Manual

Page: 53 / 163

PanaFlow HT User’s Manual 43
Chapter 3. Initial Setup and Programming
3.6.2 Flow Units
To check and/or change flow units, under
User Preference
, use the [

] or [

]
arrow key to select
Flow Units
and press
[

]
The following screen appears.
3.6.2a Velocity
To check and/or change velocity flow units, under
UserPref/Flow Units
, use the
[

] or [

] arrow key to select
Velocity
and press
[

]
The following screen
appears.
Note:
If a flow unit is not selectable in this section, it will not appear later in the
programming.
If you don’t want Velocity, select
No
, press
[

]
, If you want to display Velocity,
select
Yes
, press
[

]
twice, and the following screen appears.
If no change is desired, press
[

] t
wice and the screen returns to the
UserPref/Flow Units
menu. To change the measurement type, select the desired
option, press
[

]
twice, and a screen similar to the following appears.
Confirm the units, press
[

]
three times and return to the
UserPref/Flow Units
menu.