GE PanaFlow HT, User Manual

Page: 45 / 163

PanaFlow HT User’s Manual 35
Chapter 3. Initial Setup and Programming
3.4.4 Starting or Stopping Totalizer Measurement
To start or stop totalizer measurements:
From the display screen, press either the [

] or [

] buttons until the Start/Stop icon
(either an arrow icon for Start or a two-bar icon for Stop) is highlighted.
Once the value is highlighted, press
[

]
to start or stop totalizing.
The icon then changes to the other alternative (start or stop).
3.4.5 Resetting the Totalizer
To reset the totalizer:
From the display screen, press either the [

] or [

] buttons until the Reset icon (a
partial circle with an arrow) is highlighted.
Once the Reset icon is highlighted, press
[

]
to reset the totalizer to 0.
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00
Total m^3
Fwd Batch 0.00
E0
Rev Batch 0.00