GE Multilink ML3000, Instruction Manual, Page: 272 / 356

16–12 MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
SNMP CHAPTER 16: SNMP
 When done adding stations, click OK .
 When adding SNMP trap receivers, click on the Add button on the
SNMP menu screen.
 Make sure that each station can be pinged from the switch by using
the
Administration > Ping menu.
 Determine which sorts of traps each station will receive, as shown
above. If not sure, select all three types.
 When done adding trap receivers, click OK .