manualshive.com logo in svg

GE Multilink ML3000, Instruction Manual, Page: 15 / 356

Share
Download
GE Multilink ML3000 Instruction Manual Download Page 15

MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL

1–1

Multilink ML3000

Ethernet Communications Switch

Chapter 1: Introduction

GE Energy

Introduction

1.1

Getting Started

1.1.1

Inspecting the Package and Product

Examine the shipping container for obvious damage prior to installing this product; notify 
the carrier of any damage that you believe occurred during shipment or delivery. Inspect 
the contents of this package for any signs of damage and ensure that the items listed 
below are included.
This package should contain:

• MultiLink ML3000 Ethernet Switch, base unit (configured with user-selected port 

module options installed)

• Set of metal “ears” for 19-inch rack mounting
• Installation and user guide (this manual)

Remove the items from the shipping container. Be sure to keep the shipping container 
should you need to re-ship the unit at a later date. To validate the product warranty, please 
complete and return the enclosed product registration card to GE Multilin as soon as 
possible.
In the event there are items missing or damaged, contact the party from whom you 
purchased the product. If the unit needs to be returned, please use the original shipping 
container if possible. Refer to 

Troubleshooting

 on page 4–6, for specific return procedures.

Summary of Contents for Multilink ML3000





































































































































































































































































































































































Reviews:

No comments