29
07/30/2014
Image files can be stored in the Visual iQ or a detachable device. The
Quick-Save
feature stores a file with a default name and file type in a default directory
to learn more about setting default file names, types, and directories).
Alternatively,
use the
Save Options Menu
.
1
– Short press of this hard key to
Quick Save
the displayed image in the default directory.
A long press of this key opens the
Save Options Menu
.
2
– At all times, the intended saving location (in this case the Dev directory located on
the D drive) is listed here. After a file is stored, the status bar at the top of the screen
indicates “
Saved
.” The file name (described below) and format are also listed.
3
– While in the process of assigning an alternative name or destination for the image
file, the status bar at the top of the screen indicates “
Saving
.”
4
– Choose an alternative directory into which the file will be stored.
Note: Tap and open the target folder
5
– Tap to complete the target directory selection.
6
– Select to
Rename
the file prior to saving. The virtual keyboard opens.
7
– Select to choose from numeric characters or symbols.
8
– Tap after typing the desired name.
9
– The status bar now indicates the new target directory (in this case,
TestImages
) and
the new file name (
Trial 1
).
10
– Tap to complete the saving process.
11
– The status bar now indicates that the file has been “
Saved
.”
12
– Add audio comments to the file
before completing the saving process
