6
SD Series Ref. Manual (Packet & Transparent Mode)
MDS 05-4846A01, Rev. C
2.5 Accessories and Spares
Table 1 lists common accessories and spare items for the transceiver.
GE MDS also offers an
Accessories Selection Guide
listing an array of
additional items that may be used with the product. Contact your factory
representative or visit
www.gemds.com
to obtain a copy of the guide.
Table 1. Accessories & Spare Items
Accessory
Description
Part Number
DC Power Plug,
2-pin, polarized
Mates with power connector on radio
case. Screw terminals provided for
wires, threaded locking screws to
prevent accidental disconnect.
73-1194A53
Retrofit Kit, Digital
Contains adapters and connectors
needed to facilitate the replacement
of an existing MDS
x
710A/C/M
digital transceiver.
03-4696A01
Retrofit Kit, Analog
Contains adapters and connectors
needed to facilitate the replacement
of an existing MDS
x
710A/C/M
analog transceiver.
03-4697A01
Instruction Sheet
(for Packet and
Transparent Modes)
Describes the installation and setup
of the transceiver. A companion to
this Reference Manual.
05-4847A01
Flat Mounting
Brackets
(Standard)
Brackets that attach to the bottom of
the unit. Used for mounting to a flat
mounting service.
03-4123A14
Flat Mounting
Brackets
(x710-compatible)
Brackets that attach to the bottom of
the unit. Used for mounting to a flat
mounting service. Bracket matches
MDS x710 Transceiver mounting
holes.
Consult
Factory
DIN Rail Mounting
Bracket Kit
Contains bracket for mounting the
transceiver to standard 35 mm DIN
rails commonly used in equipment
cabinets and panels.
03-4125A04
Reprogramming
Application for
Firmware Upgrade
Automated software program for
upgrading the radio’s internal
firmware code.
This application is
under development at press time.
Check with your factory
representative for availability.
06-6241A01