102
SD Series Ref. Manual (Packet & Transparent Mode)
MDS 05-4846A01, Rev. C
Invisible place holder
Figure 83. Local Reprogram Menu
7. On the Local Reprogram Menu, verify that the radio has the right IP
address for the TFTP server on the
HostIP
option. Set the path where
the reprogramming file is located in the TFTP server on the
File
option.
8. Start reprogramming by selecting
Retrieve File
option from the
menu. A progress string indicates the reprogramming status. At this
point, the radio is programming the inactive image. (There is an
Active and an Inactive image in the radio at all times).
9. As soon as reprogramming is complete, verify the package down-
loaded into flash using
Image Verify
option. Make sure to select the
inactive
image when the choice is presented.
10. Reboot to the inactive image once verification is completed suc-
cessfully, using
Reboot Device
.
11. Verify that radio is running new application image by logging in
and viewing the firmware version on the
Starting Information Screen
.
NOTE:
If a firmware installation fails, the radio is left with the original
active image intact. The installation should be attempted
again.