GE JP3530, Owner'S Manual

Page: 12 / 72

12
49-2000975 Rev. 1
Tri-Ring Surface Element
■ To use the large surface element, push and turn the
center control knob clockwise to , stopping at the
desired setting. This will activate the entire heating area.
■ To use the medium surface element, push and turn
the center control knob clockwise to , stopping at
the desired setting. This will activate the medium-size
heating area.
■ To use the smallest surface element, push and turn
the center control knob clockwise to , stopping at the
desired setting. This will activate the smallest, inside
heating area.
Element Cycling
Turn Product On/Off
Operating The Cooking Elements
USING THE COOKT
OP:
Element
Cycling
/
Turn
Product
On/Of
f /
Operating
The
Cooking
Elements
Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:
■ The pan boils dry.
■ The pan bottom is not flat.
■ The pan is off-center.
■ There is no pan on the element.
■ Push the knob down and turn in either direction to the
setting you want. When the control is in any position
other than Off , it may be rotated without pushing it
down. You may feel a slight bump when it is rotated
through the Lo or Hi positions. You may hear slight
clicking sounds during cooking, indicating the control
is keeping the power level you set.
■ A HOT SURFACE indicator light will glow when any
radiant element is turned on and will remain on until
the surface is cooled to approximately 150°F.
■ Be sure you turn the control knob to Off when you
finish cooking. It will snap into the Off position.
Dual Surface Element
■ To use the small surface element, turn the control
knob to the Small Burner settings.
■ To use the large surface element, turn the control
knob to the Large Burner settings.