16
49-2000738 Rev. 0
Installation Instructions
INSTALLING THE COOKTOP
1
Installing the Junction Box
Install an approved junction box where it will be
easily reached through the front of the cabinet
where the cooktop will be located.
The cooktop
conduit is 4' long.
IMPORTANT: The junction box must be located
where it will allow considerable slack in the
conduit for serviceability.
3
Attach Foam Tape
Apply the foam tape around the outer edge of
WKHJODVV'RQRWRYHUODSWKHIRDPWDSH
4
Locate Mounting Parts
On the underside of the cooktop, you will find
the hex screws that are noted in the diagram
below. Remove and use these hex screws to
PRXQWWKHEUDFNHWVDWWKHVHWZRORFDWLRQV'R
not over-tighten
the screws.
Turn bracket
inward to avoid
interference
when dropping
the cooktop into
the countertop.
2
Protect Surface Of Cooktop
3ODFHDWRZHORUWDEOHFORWKRQWRWKH
countertop. Lay the cooktop upside down onto
the protected surface.
%RWWRPRI&RRNWRS
Cloth under Cooktop
Install junction box so
that it can be reached
through the front of the
cabinet.
5
s
Min.
%RWWRPRI&RRNWRS
Foam Tape
Cooktop
Glass
5
Insert Cooktop into Cutout
Insert the cooktop centered into the cutout
opening. Make sure the front edge of the
countertop is parallel to the cooktop. Make final
check that all required clearances are met.
6
Attach Hold-Down Brackets to
Cabinet
Open the cabinet door. Install the second screw
through the bracket and tighten. Then tighten the
first screw. Install the 3" screw until it touches
the bottom of the countertop.
IMPORTANT:
Turn the 3" screw until it touches
WKHERWWRPRIWKHFRXQWHUWRS'RQRWRYHUWLJKWHQ
Cooktop
Cooktop
Countertop
Hex Screws
%RWWRPRI&RRNWRS
INSTALLATION INSTRUCTIONS
Summary of Contents for JP3021
