GE Invenia ABUS 2.0, Technical Publication

Page: 43 / 278

Safety considerations
Invenia ABUS 2.0 – System Setup and Basic Service Manual 1-17
4700-0043-00 Rev. 4
Electrical safety
Safe practices
Follow these guidelines to minimize shock hazards whenever
you are using the Invenia ABUS 2.0:
• The Invenia ABUS 2.0 is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with third wire safety ground.
• The power outlet used for this equipment should not be
shared with other types of equipment.
• Both the system power cable and the power connector must
meet international electrical standards
Transducer
Follow these guidelines before connecting the transducer to the
Invenia ABUS 2.0:
• Inspect the transducer prior to each use for damage or
degradation to the:
• housing
• lens
• seal
• connector
pins
• Do not use a damaged or defective transducer.
• Never immerse the transducer connector or adapter into
any liquid.
DANGER
Electrical Warning
Connecting an Invenia ABUS 2.0 to the wrong voltage level will
most likely damage it.