GE Invenia ABUS 2.0, Technical Publication

Page: 110 / 278

System Setup
3-36 Invenia ABUS 2.0 – System Setup and Basic Service Manual
4700-0043-00 Rev. 4
Warning Label Locations (continued)
GE Cares Label Placement
Figure 3-3. GE Cares Label Location
Table 3-5: Rear Panel Label Explanations
1. Manufacturer’s name and address
2. Unique Device Identification (UDI) Label.
3. “
ATTENTION - Consult accompanying
documents ” is intended to alert the user to
refer to the operator manual or other
instructions when complete information cannot
be provided on the label.
4. TUV Rhineland Label: NRTL Listing and
Certification Mark is used to designate
conformance to nationally recognized product
safety standards. The Mark bears the name
and/or logo of the testing laboratory, product
category, safety standard to which conformity is
assessed, and a control number.
5. Authorized European Representative address.
6. BF Applied Part
7. Prescription Device (For U.S.A. Only)
8. Identification and Rating Plate–USA/Asia 120V
console
9. CISPR Emissions Label
Device and transducer IP Code
10. Mercury Warning Label
11. WEEE Symbol
12. Possible shock hazard. Do not remove covers
or panels. No user serviceable parts are inside.
Refer servicing to qualified service personnel.
13. The equipment weighs approximately 103 kg
(227 lbs). To avoid possible injury and
equipment damage when transporting from one
area of use to another:
• Be sure the pathway is clear.
• Limit movement to a slow careful walk.
• Use two or more persons to move the
equipment on inclines or long distance.
14. Patents
15. CE Mark
16. eIFU Symbol
17. Country of Origin
18. GE Cares