6
Remote control
- Inverter models
Remote controller
General remarks
• Be sure there are no obstructions
between the receiver and the remote
control unit. The unit has a range of
approximately 6 meters.
• Do not expose the remote control unit to
moisture, excessive direct sunlight or heat.
• Do not drop or throw the remote
control unit.
• When restarting, the unit resumes
operating on the last mode set before
shut down. The outdoor unit will restart in
approximately 30 seconds.
1. ON/OFF button
Press this button to turn the unit on or off.
3. MODE button
Select the desired mode of operation by pressing this
button. The unit can operate on: AUTO, COOL, DRY,
FAN or HEAT modes.
4. Non Functional buttons
These features are not available for this product.
2. TEMP buttons
Press PLUS ( + ) or MINUS ( - ) button to set temperature
up or down. Temperature can be set from 16°C to 30°C
in COOL, DRY and HEAT modes.
COOL mode
DRY mode
AUTO mode
FAN mode
HEAT mode
GE_SAC_ENGL 01-02-2011 Page 6
6. TIMER ON & TIMER OFF buttons
When the unit is in off status, press TIMER ON button
to turn it on at the specified time up to 24 hours in
advance. Press the PLUS ( + ) or MINUS ( - ) buttons
and select TIMER ON time. Then, press TIMER ON
button once more to confirm the times.
When the unit is operating, press TIMER OFF button to
turn it of
to 24 hours in
advance following the same process as above.
5. SWING button
With each press of this button you can change to
one of eight different swing settings.
Press once more to stop the louver moving.
7. LIGHT button
Press to turn off or on the LED display
on the indoor unit.
